36 Volt 100Ah Lithium Ion Rechargeable Marine Battery

Lithium ion Rechargeable Marine Battery 36V 100AH with 2 years Warranty, Lifepo4 battery with Bluetooth

 

This specification defines the performance of rechargeable LiFePO4 battery pack describes the type, performance, technical characteristics, warning and caution of the battery pack.

 

 

SPECIFICATION

 

Specification NO Items Description Normal Specification 1 Nominal Voltage 38.4V 2 Normal Capacity 100Ah 3 Internal Resistance ≤25mΩ 4 Series-Parallel application up to 4 series-connected applications 5 Communication function Bluetooth Standard Charge 6 Charge operation temperature range 0~45℃ 7 Normal charge voltage 43.8±0.2V 8 Recommended float charge voltage(for Standby use) 41.4±0.2V 9 Allowed MAX constant charge current 80A@Battery initial Temp 25±5℃ 10 Recommended charge current 100A Standard Discharge 11 Discharge operation temperature range -20~60℃ 12 Outgoing Voltage ≥38.4V 13 Allowed MAX constant discharge current 100A @Battery initial Temp 25±5℃ 14 Pulse discharge current 400±100A/Continuous for 5±1s 15 Discharge end voltage 10.0~11.5V

 

Customize Any of The Following Battery Packs as Required
Can be customized according to the requirements of 3.7V, 7.4V, 11.1V, 14.8V, 18.5V, 22.2V, 25.9V, 36V, 48V, 60V, 72V
 

 

 

Test Conditions

Electrical Characteristics & Test Condition
Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.

NO	Items	Criterion		Condition
1	Min Capacity	≥98Ah		Rest for 1 hour after fully charged, then discharge with 0.33C current until the battery reaches the discharge cutoff voltage. Repeat above process for three times, if the discharge time is not less than 180 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity.
2	Cycle life (DOD%100)	≥2000cycle		Discharge with the current of 0.33C until it can’t discharge, and then rest it for 1h. Charge the battery following CC (1C)/CV (43.8V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life.
3	Discharge Temperature Characteristics	-20℃	≥70%	At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage. Record the ratio between discharging & charging capacity.
		0℃	≥80%
		25℃	100%
		55℃	≥95%
4	Charge Retention ability	remain capacity≥90%		Charge the battery to full capacity and store it for 28days, and then discharge it with 0.33C to the cut-off voltage.

 

 

 

Features:
The battery uses imported original big brand ion batteries, with a small internal resistance, big capacity, cycle times and more, no memory effect, etc; internal circuit for multiple protection design, can prevent over charge, over discharge, over current; production process quality inspection and monitoring the use of computers to ensure superior battery performance.

 

Applications:
Golf trolly of 12v 1200w motor , Wireless camera, surveillance cameras, wireless infrared detector, car LCD TV, portable DVD, personal treatment system, PDA personal data assistant, personal communications systems, walkie-talkies, digital cameras, camcorders, video cameras, Bluetooth devices, CD players, MD players, MP3 players, smart cards, aviation model LED lights and other fields can be used in 12V power.

 

 

 

 

How to choose a suitable battery pack?

• battery voltage is the same with the original.
• battery size same with the original. Or similar/smaller.
• battery plugs same with the original (check the plug diagram)

Match the above three conditions, in general, this battery can be used.

The larger of MAH, the longer use time. Different voltage, battery size, shape, can be same voltage, because the battery combination of different ways, the shape is not the same. You can leave a message about your old battery, please pay attention!!!

 

 

 

Product advantage

 

 

long life & deep cycle( over 2000cycles @ 100%DOD)

· with built-in PCM/BMS protection

· super quick charge/discharge performance

· safe pressure valve design ( no explosion, no fire)

· high energy density

· low self-discharge( <3% per month,<15% per year)

· high consistency

· easily replace lead acid battery

 

 

 

Quality Control

 

 

Capacity test, High current discharge test,Low temperature test, Short circuit test, Over charging test,

Over discharging test, Cycle performance test, Crush test, Impact test, Vibration test, High temperature test

 

Warranty

• We offer 3 years warranty for battery packs in low discharge rate (below 1C) applications,
• We offer 2 years warranty for battery packs in high discharge rate (1~3C) applications.
• For charger / BMS, here are one year warranty.

 

Store

The battery need to be charged every 6 months if out of use; No fall down, no pile up over 6 layers, and keep face up.

 

 

FAQ

 

 

 

1. Can you accept OEM and ODM services?
Yes, just tell me your requirements and we will provide you with the best solution.

 

2. What are your payment channels?
TT, L/C, West Union etc.

 

3. What service do you provide?
All our batteries have passed the safe test and performance test before shipment.
Support printing your logo on the battery.
Small order is acceptable.

 

 

4. How you shipping the goods and how long it will take?
Normally FEDEX, DHL,UPS etc, around 4-7 days.

 

 

5. Can I just try samples for the first order?

Yes, 1 pcs sample and small trial order are acceptable.

 

 

 

24 hours customer service, waiting for your inquiry!