48V 100AH / 200AH Deep Cycle Battery Iron Case Rechargeable Marine Battery
LCD display to show the voltage,capacity, current and SOC
The structure and size are flexible
Optional appearance
Support Canbus commnunication
SPECIFICATION
| NO. |
Items |
Criteria |
Remarks |
| 2.1 |
Rated Capacity |
200Ah |
|
| Minimum Capacity |
190Ah |
|
| 2.2 |
Energy |
10.24KWh |
|
| 2.3 |
Nominal Voltage |
51.2V |
|
| 2.4 |
Outgoing Voltage |
≥51.2V |
|
| 2.5 |
Internal resistance |
≤30mΩ |
|
| 2.6 |
Limited charge voltage |
58.4±0.2V |
|
| 2.7 |
Floating charge voltage |
55.2±0.2V |
|
| 2.8 |
Standard charge current |
60A |
|
| 2.9 |
Maximum charge current |
100A |
|
| 2.10 |
Standard discharge current |
100A |
|
| 2.11 |
Maximum discharge current |
150A/Continuous for 1 hour |
|
| 2.12 |
Pulse discharge current |
200A/Continuous for 15 min |
|
| 2.13 |
Discharge cut-off voltage |
40.0V |
|
|
2.14
|
Dimension |
Length: 552±3mm |
|
| Width: 400±3mm |
|
| Height: 400±3mm |
|
| 2.15 |
Weight |
Approx: 125±5Kg |
|
|
2.16
|
Operating Temperature |
Charging:0～45℃ |
| Discharging:-20～60℃ |
| Recommended operating temperature:15℃～35℃ |
| 2.17 |
Self-discharge rate |
Residual capacity:≤3%/ month;≤15%/years |
| Reversible capacity: ≤1.5%/ month;≤8%/ years |
| 2.18 |
Storage Temperature & Humidity Range |
Less than 1 month:-20℃～35℃,45%RH～75％RH |
| Less than 3 months:-10℃～35℃,45%RH～75％RH |
|
Recommended storage environment:
15℃～35℃,45%RH～75％RH
|
|
Long time storage:
If the battery need be stored for a long time, the voltage should be 52.8V(50%SOC), and stored in the condition as storage proposal. It need at least one charge & discharge cycle every six months
|
|
Customize Any of The Following Battery Packs as Required
Can be customized according to the requirements of 3.7V, 7.4V, 11.1V, 14.8V, 18.5V, 22.2V, 25.9V, 36V, 48V, 60V, 72V
| NO. |
Items |
Criteria |
Testing method |
| 4.1 |
Rated Capacity |
200Ah |
Rest for 1 hour after fully charged, then discharge with 0.33C current until the battery reaches the discharge cutoff voltage. Repeat above process for three times, if the discharge time is not less than 120 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity. |
| 4.2 |
Minimum Capacity |
190Ah |
| 4.3 |
Internal resistance |
≤25mΩ |
50% battery SOC state frequency of 1 KHZ ac resistance tester |
| 4.5 |
Cycle life
(DOD100%)
|
≥1600cycle |
Discharge with the current of 0.33C until it can’t discharge, and then rest it for 1h. Charge the battery following CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life. |
| 4.6 |
Discharge Temperature
Characteristics
|
-20℃ |
≥70% |
At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage and record charge capacity. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage. |
| -0℃ |
≥80% |
| 25℃ |
≥100% |
| 55℃ |
≥95% |
| 4.7 |
Charge Retention ability |
Residual
capacity≥80%
|
Charge the battery to full capacity and store it for 28days, and then discharge it with 0.33C to the cut-off voltage. |
| Recovery capacity≥90% |
Circuit Protection
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
| Test item |
Content |
Criterion |
| Over charge |
Over-charge protection for each cell |
3.80±0.03V |
| Over-charge release for each cell |
3.60±0.05V |
| Over-charge release method |
Under the release voltage |
| Over discharge |
Over-discharge protection for each cell |
2.00±0.05V |
| Over-discharge release for each cell |
2.30±0.05V |
| Over-discharge release method |
Charging |
| Over current |
Discharge over current protection |
350~550A |
| Protection delay time |
10~40ms |
| Over current release method |
Release after cutoff the load. |
|
Over
Temperature
|
Battery over temperature |
Protection @65±5℃ |
| Release @55±5℃ |
| MOSFET over temperature |
Protection @100±5℃ |
| Release @70±15℃ |
Applications:
Golf trolly , Wireless camera, surveillance cameras, wireless infrared detector, car LCD TV, portable DVD, personal treatment system, PDA personal data assistant, personal communications systems, walkie-talkies, digital cameras, camcorders, video cameras, Bluetooth devices, CD players, MD players, MP3 players, smart cards, aviation model LED lights and other fields can be used
Features:
The battery uses original brand ion batteries, with a small internal resistance, big capacity, cycle times and more, no memory effect, etc; internal circuit for multiple protection design, can prevent over charge, over discharge, over current; production process quality inspection and monitoring the use of computers to ensure superior battery performance.
How to choose a suitable battery pack?
- battery voltage is the same with the original.
- battery size same with the original. Or similar/smaller.
- battery plugs same with the original (check the plug diagram)
Match the above three conditions, in general, this battery can be used.
The larger of MAH, the longer use time. Different voltage, battery size, shape, can be same voltage, because the battery combination of different ways, the shape is not the same. You can leave a message about your old battery, please pay attention!!!
Product advantage
long life & deep cycle( over 2000cycles @ 100%DOD)
· with built-in PCM/BMS protection
· super quick charge/discharge performance
· safe pressure valve design ( no explosion, no fire)
· low self-discharge( <3% per month,<15% per year)
· high consistency
· easily replace lead acid battery
Warranty
• We offer 3 years warranty for battery packs in low discharge rate (below 1C) applications,
• We offer 2 years warranty for battery packs in high discharge rate (1~3C) applications.
• For charger / BMS, here are one year warranty.
Store
The battery need to be charged every 6 months if out of use; No fall down, no pile up over 6 layers, and keep face up.
Battery Pack Delivery
• By Air Door to Door Service
• By Sea Door to Door Service
• By Express: EMS, TNT, UPS, FedEx
FAQ
1. Can you accept OEM and ODM services?
Yes, just tell me your requirements and we will provide you with the best solution.
2. What are your payment channels?
TT, L/C, West Union etc.
3. What service do you provide?
All our batteries have passed the safe test and performance test before shipment.
Support printing your logo on the battery.
4. How you shipping the goods and how long it will take?
Normally FEDEX, DHL,UPS etc, around 4-7 days.
5. Can I just try samples for the first order?
Yes, 1 pcs sample and small trial order are acceptable.
24 hours customer service, waiting for your inquiry!
Your message must be between 20-3,000 characters!
