12 Volt Rechargeable Lithium Ion Deep Cycle Marine Battery

Powerful Reliable 12V200AH Rechargeable Marine Battery Nano LiFePO4 Battery

 

This specification defines the performance of rechargeable LiFePO4 battery pack describes the type, performance, technical characteristics, warning and caution of the battery pack.

 

 

SPECIFICATION

 

NO. Items Criteria Remarks 2.1 Rated Capacity 200Ah   Minimum Capacity 190.0Ah   2.2 Energy 2.56KWh   2.3 Nominal Voltage 12.8V   2.4 Outgoing Voltage ≥12.8V   2.5 Internal resistance ≤20mΩ   2.6 Limited charge voltage 14.6±0.2V   2.7 Floating charge voltage 13.8±0.2V   2.8 Standard charge current 60A   2.9 Maximum charge current 80A   2.10 Standard discharge current 60A   2.11 Maximum discharge current 100A/ Continuous for 30min   2.12 Pulse discharge current 350A/Continuous for 3 s   2.13 Discharge cut-off voltage 8.0V     2.14 Dimension Length: 485±3mm   Width: 170±3mm   Height: 245±3mm   2.15 Weight Approx: 19.8±0.5Kg     2.16 Operating Temperature Charging:0～45℃ Discharging:-20～60℃ Recommended operating temperature:15℃～35℃ 2.17 Self-discharge rate Residual capacity:≤3%/month;≤15%/years Reversible capacity:≤1.5%/month;≤8%/years 2.18 Storage Temperature & Humidity Range Less than 1 month:-20℃～35℃,45%RH～75％RH Less than 3 months:-10℃～35℃,45%RH～75％RH Recommended storage environment: 15℃～35℃,45%RH～75％RH Long time storage: If the battery need be stored for a long time, the voltage should be 13.2V(50%SOC), and stored in the condition as storage proposal. It need at least one charge & discharge cycle every six months

 

Customize Any of The Following Battery Packs as Required
Can be customized according to the requirements of 3.7V, 7.4V, 11.1V, 14.8V, 18.5V, 22.2V, 25.9V, 36V, 48V, 60V, 72V
 

 

 

Test Conditions

3.1 Standard Test Conditions

3.1.1 Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.

3.1.3 Unless otherwise specified, the tested product is required unused within two month after outgoing.

3.2 Standard Charge Mode

"Standard Charge" means at 25±2℃ charge to limit voltage with 0.33C constant current, then charge with constant voltage until current less than 0.02ItA.

3.3 Quick Charge Mode

" Quick Charge" means at 25±2℃ charge to limit voltage with 0.5 C constant current, then charge with constant voltage until current less than 0.02ItA.

3.4 Standard Discharge Mode

"Standard Discharge" means at 25±2℃ discharge to the cut-off voltage with 0.33C current.

3.5 Quick Discharge Mode

"Quick Discharge" means discharge to the cut-off voltage with 0.5C current.

 

 

 

Features:
The battery uses imported original big brand ion batteries, with a small internal resistance, big capacity, cycle times and more, no memory effect, etc; internal circuit for multiple protection design, can prevent over charge, over discharge, over current; production process quality inspection and monitoring the use of computers to ensure superior battery performance.

 

Applications:
Golf trolly of 12v 1200w motor , Wireless camera, surveillance cameras, wireless infrared detector, car LCD TV, portable DVD, personal treatment system, PDA personal data assistant, personal communications systems, walkie-talkies, digital cameras, camcorders, video cameras, Bluetooth devices, CD players, MD players, MP3 players, smart cards, aviation model LED lights and other fields can be used in 12V power.

 

 

 

 

How to choose a suitable battery pack?

• battery voltage is the same with the original.
• battery size same with the original. Or similar/smaller.
• battery plugs same with the original (check the plug diagram)

Match the above three conditions, in general, this battery can be used.

The larger of MAH, the longer use time. Different voltage, battery size, shape, can be same voltage, because the battery combination of different ways, the shape is not the same. You can leave a message about your old battery, please pay attention!!!

 

 

 

Product advantage

 

 

long life & deep cycle( over 2000cycles @ 100%DOD)

· with built-in PCM/BMS protection

· super quick charge/discharge performance

· safe pressure valve design ( no explosion, no fire)

· high energy density

· low self-discharge( <3% per month,<15% per year)

· high consistency

· easily replace lead acid battery

 

 

 

Quality Control

 

 

Capacity test, High current discharge test,Low temperature test, Short circuit test, Over charging test,

Over discharging test, Cycle performance test, Crush test, Impact test, Vibration test, High temperature test

 

Warranty

• We offer 3 years warranty for battery packs in low discharge rate (below 1C) applications,
• We offer 2 years warranty for battery packs in high discharge rate (1~3C) applications.
• For charger / BMS, here are one year warranty.

 

Store

The battery need to be charged every 6 months if out of use; No fall down, no pile up over 6 layers, and keep face up.

 

 

FAQ

 

 

 

1. Can you accept OEM and ODM services?
Yes, just tell me your requirements and we will provide you with the best solution.

 

2. What are your payment channels?
TT, L/C, West Union etc.

 

3. What service do you provide?
All our batteries have passed the safe test and performance test before shipment.
Support printing your logo on the battery.
Small order is acceptable.

 

 

4. How you shipping the goods and how long it will take?
Normally FEDEX, DHL,UPS etc, around 4-7 days.

 

 

5. Can I just try samples for the first order?

Yes, 1 pcs sample and small trial order are acceptable.

 

 

 

24 hours customer service, waiting for your inquiry!